Brake light switch e-chopper for Star-Biker Chopper 6.0s & HL3.0s brake contact switch
Brake safely with original Star-Biker quality: The brake contact switch is an indispensable safety component for your e-chopper. It fulfills two critical functions: firstly, it immediately activates your brake light when the lever is pulled to warn following traffic. Secondly, it cuts off the power supply to the motor (motor cut-off). This ensures safe stopping without the hub motor unintentionally continuing to run or pressing against the brake. A small component with an enormous impact on your driving safety.
Key Technical Data
Your Benefits at a Glance
- Maximum safety: Reliably prevents the motor from continuing to accelerate during braking.
- Early warning: Activates the brake light even with minimal lever pull, before full braking force is applied.
- Robust design: Durable contacts and weatherproof casing for reliable use in all weather conditions.
- Easy replacement: Ideal as a spare part in case of wear or after a fall, to restore full functionality.
- Perfect fit for Star-Biker Chopper 6.0s and Cruiser 3.0s (Luqi HL6.0 & HL3.0).
- Scope of delivery: 1× brake contact switch incl. cable and connector.
Vehicle Compatibility
This switch is the exact original spare part for the following models:
- Star-Biker Chopper 6.0s / 6.0s Premium
- Star-Biker Cruiser 3.0s
- Luqi HL6.0 / HL6.0s / HL3.0
Expert Tip
Troubleshooting & Assembly: If your e-chopper suddenly stops accelerating despite a full battery, it is often due to a stuck brake contact switch. The controller then "thinks" you are continuously braking and does not release the motor. Regularly check the switch for smooth operation and dirt. When mounting it on the lever, make sure that the cable is routed in such a way that it is not put under tension when steering.
Frequently Asked Questions about the Product
Do I need different switches for the left and right sides?
Generally, the switches for the left (rear brake) and right (front brake) levers are identical. However, check the cable length and connector of your model beforehand.
My brake light is constantly on – is that due to the switch?
Yes, this is a typical sign of a defective or incorrectly seated brake contact switch. If the pin of the switch is no longer correctly pressed by the brake lever, the circuit remains closed and the brake light stays on.
Do I have to drain the brake fluid for installation?
No, not at all. The switch is a purely electrical component that is screwed or plugged onto the outside of the brake lever. The hydraulic system of the brake remains completely closed.
At Star-Biker, we place great importance on fast and reliable delivery of your order. Whether you're ordering accessories, spare parts, or a new vehicle from us, we'll take care of everything to ensure your order arrives safely and on time.
| Performance | Details |
| Shipping costs | Shipping costs are calculated at checkout. |
| Delivery time | 5 to 8 working days |
| Delivery area | Europe-wide shipping |
| Service and maintenance package | Optional – available throughout Europe |
![Abdeckplane [Allwetterschutz] Ersatzteil](http://www.star-biker.com/cdn/shop/files/UntitledProject-139.jpg?v=1747153947)
![Abdeckplane [Allwetterschutz] Ersatzteil](http://www.star-biker.com/cdn/shop/files/star_biker_regenschutz.jpg?v=1747153947)
